4mm O.D to M4x0.7 thread male elbow push to connect fitting is used to pipe at right angles to a female thread. Most general style in compressed air circuits. The 4mm to M4 male swivel elbow is made of PBT and nickel plated brass body.
| Specification of 4mm O.D to M4x0.7 Thread Male Elbow Push to Connect Fitting |
|
| Part Nymber: PL 04-M4 |
 |
| Push in Tube O.D: 4mm |
|
| Thread Size: M4*0.7 |
|
| Body Material: PBT plastic | |
| Thread Material: Nickel Plated Brass | |
| Sealing, O-ring: NBR |
|
| Lock Claw: Stainless Steel |
|
| Fluid Admitted: Air, Vacuum, Water* |
|
| Working Pressure: 0∽1.0MPa | 0∽150psi | |
| Proof Pressure: 3.0Mpa | 435psi | |
| Negative Pressure: -100Kpa | -29.5 In Hg | |
| Working Temperature: 0∽60°C | 32∽140°F | |
| Applicable Tube: PU/PA/PE/PVC/PTFE... | |
| *Not intended for use in potable water systems, no freezing | |