16mm O.D to 12mm O.D tube union tee reducer push to connect fitting uses to connect tubes with size down in both 90 degree directions. The O.D of inline two tubings are smaller than tube in the middle. This is 12mm to 16mm to 12mm O.D union T reducer.
| Specification of 16mm O.D to 12mm O.D Tube Union Tee Reducer Push to Connect Fitting |
|
| Part Nymber: PGE 16-12 |
 |
| Push in Tube O.D1: 12mm |
|
| Push in Tube O.D2: 16mm | |
| Body Material: PBT Plastic | |
| Sealing, O-ring: NBR |
|
| Lock Claw: Stainless Steel |
|
| Fluid Admitted: Air, Vacuum, Water* |
|
| Working Pressure: 0∽1.0MPa | 0∽150psi | |
| Proof Pressure: 3.0Mpa | 435psi | |
| Negative Pressure: -100Kpa | -29.5 In Hg | |
| Working Temperature: 0∽60°C | 32∽140°F | |
| Applicable Tube: PU/PA/PE/PVC/PTFE... | |
| *Not intended for use in potable water systems, no freezing | |