8mm O.D to 6mm O.D tube union tee reducer push to connect fitting uses to connect tubes with size down in both right angle directions in tubing systems. The tubing O.D in the middle is 8mm and inline two tubings are 6mm.
| Specification of 8mm O.D to 6mm O.D Tube Union Tee Reducer Push to Connect Fitting |
|
| Part Nymber: PGE 08-06 |
 |
| Push in Tube O.D1: 6mm |
|
| Push in Tube O.D2: 8mm | |
| Body Material: PBT Plastic | |
| Sealing, O-ring: NBR |
|
| Lock Claw: Stainless Steel |
|
| Fluid Admitted: Air, Vacuum, Water* |
|
| Working Pressure: 0∽1.0MPa | 0∽150psi | |
| Proof Pressure: 3.0Mpa | 435psi | |
| Negative Pressure: -100Kpa | -29.5 In Hg | |
| Working Temperature: 0∽60°C | 32∽140°F | |
| Applicable Tube: PU/PA/PE/PVC/PTFE... | |
| *Not intended for use in potable water systems, no freezing | |