12mm O.D to 8mm O.D tube union tee reducer push to connect fitting uses to connect tubes with size down in both right angle directions in in compressed air circuits. The tubing O.D in the middle is bigger than inline two tubings. The tubing connection can be PU tubing, nylon tubing, teflon tubing and PE tubing.
| Specification of 12mm O.D to 8mm O.D Tube Union Tee Reducer Push to Connect Fitting |
|
| Part Nymber: PGE 12-08 |
 |
| Push in Tube O.D1: 8mm |
|
| Push in Tube O.D2: 12mm | |
| Body Material: PBT Plastic | |
| Sealing, O-ring: NBR |
|
| Lock Claw: Stainless Steel |
|
| Fluid Admitted: Air, Vacuum, Water* |
|
| Working Pressure: 0∽1.0MPa | 0∽150psi | |
| Proof Pressure: 3.0Mpa | 435psi | |
| Negative Pressure: -100Kpa | -29.5 In Hg | |
| Working Temperature: 0∽60°C | 32∽140°F | |
| Applicable Tube: PU/PA/PE/PVC/PTFE... | |
| *Not intended for use in potable water systems, no freezing | |