14mm O.D to 12mm O.D tube union tee reducer push to connect fitting uses to connect tubes with size down in both 90 degree directions. The tubing O.D in the middle is bigger than inline two tubings. The stainless steel collet design ensures superior clamping with various types of tubing such as polyethylene tubing, polyurethane tubing, nylon tubing and teflon tubing.
| Specification of 14mm O.D to 12mm O.D Tube Union Tee Reducer Push to Connect Fitting |
|
| Part Nymber: PGE 14-12 |
 |
| Push in Tube O.D1: 12mm |
|
| Push in Tube O.D2: 14mm | |
| Body Material: PBT Plastic | |
| Sealing, O-ring: NBR |
|
| Lock Claw: Stainless Steel |
|
| Fluid Admitted: Air, Vacuum, Water* |
|
| Working Pressure: 0∽1.0MPa | 0∽150psi | |
| Proof Pressure: 3.0Mpa | 435psi | |
| Negative Pressure: -100Kpa | -29.5 In Hg | |
| Working Temperature: 0∽60°C | 32∽140°F | |
| Applicable Tube: PU/PA/PE/PVC/PTFE... | |
| *Not intended for use in potable water systems, no freezing | |