8mm O.D to 4mm O.D tube union tee reducer push to connect fitting use to connect tubes with size down in both right angle directions. The tube O.D in the middle is 8mm and inline two tubes are 4mm. The pneumatic plastic tubing connection of push in fitting can be polyurethane (PU) tubing, polyethylene (PE) tubing, nylon (PA) tubing and teflon (PTFE) tubing.
| Specification of 8mm O.D to 4mm O.D Tube Union Tee Reducer Push to Connect Fitting |
|
| Part Nymber: PGE 08-04 |
 |
| Push in Tube O.D1: 4mm |
|
| Push in Tube O.D2: 8mm | |
| Body Material: PBT Plastic | |
| Sealing, O-ring: NBR |
|
| Lock Claw: Stainless Steel |
|
| Fluid Admitted: Air, Vacuum, Water* |
|
| Working Pressure: 0∽1.0MPa | 0∽150psi | |
| Proof Pressure: 3.0Mpa | 435psi | |
| Negative Pressure: -100Kpa | -29.5 In Hg | |
| Working Temperature: 0∽60°C | 32∽140°F | |
| Applicable Tube: PU/PA/PE/PVC/PTFE... | |
| *Not intended for use in potable water systems, no freezing | |