12mm O.D to 10mm O.D tube union tee reducer push to connect fitting use to branch line with size down in both side 90 degree directions. The two inline tubes O.D are 12mm and tube O.D in the middle is 10mm.
| Specification of 12mm O.D to 10mm O.D Tube Union Tee Reducer Push to Connect Fitting |
|
| Part Nymber: PEG 12-10 |
 |
| Push in Tube O.D1: 12mm |
|
| Push in Tube O.D2: 10mm | |
| Body Material: PBT Plastic | |
| Sealing, O-ring: NBR |
|
| Lock Claw: Stainless Steel |
|
| Fluid Admitted: Air, Vacuum, Water* |
|
| Working Pressure: 0∽1.0MPa | 0∽150psi | |
| Proof Pressure: 3.0Mpa | 435psi | |
| Negative Pressure: -100Kpa | -29.5 In Hg | |
| Working Temperature: 0∽60°C | 32∽140°F | |
| Applicable Tube: PU/PA/PE/PVC/PTFE... | |
| *Not intended for use in potable water systems, no freezing | |