16mm O.D to 16mm O.D tube union tee push to connect fitting is easy to install and release in tubing systems. 16mm union tee push in fittings connects three same size plastic tubings. To release the tubing, press the release sleeve on the fitting and you can easily pull the tube out.
| Specification of 16mm O.D to 16mm O.D Tube Union Tee Push to Connect Fitting |
|
| Part Nymber: PE 16 |
 |
| Push in Tube O.D: 16mm |
|
| Body Material: PBT Plastic | |
| Sealing, O-ring: NBR |
|
| Lock Claw: Stainless Steel |
|
| Fluid Admitted: Air, Vacuum, Water* |
|
| Working Pressure: 0∽1.0MPa | 0∽150psi | |
| Proof Pressure: 3.0Mpa | 435psi | |
| Negative Pressure: -100Kpa | -29.5 In Hg | |
| Working Temperature: 0∽60°C | 32∽140°F | |
| Applicable Tube: PU/PA/PE/PVC/PTFE... | |
| *Not intended for use in potable water systems, no freezing | |