1/4" O.D to 1/4" O.D tube union tee push to connect fitting is used for connecting three 1/4 inch O.D pneumatic plastic tubings in two right angle directions. The 1/4 inch union tee push in fitting is made of PBT plastic and plastic release buttons.
| Specification of 1/4" O.D to 1/4" O.D Tube Union Tee Push to Connect Fitting |
|
| Part Nymber: PE 1/4 |
 |
| Push in Tube O.D: 1/4" |
|
| Body Material: PBT Plastic | |
| Sealing, O-ring: NBR |
|
| Lock Claw: Stainless Steel |
|
| Fluid Admitted: Air, Vacuum, Water* |
|
| Working Pressure: 0∽1.0MPa | 0∽150psi | |
| Proof Pressure: 3.0Mpa | 435psi | |
| Negative Pressure: -100Kpa | -29.5 In Hg | |
| Working Temperature: 0∽60°C | 32∽140°F | |
| Applicable Tube: PU/PA/PE/PVC/PTFE... | |
| *Not intended for use in potable water systems, no freezing | |