10mm O.D to 9mm O.D tube union tee reducer push to connect fitting use to branch line with size down in both side 90 degree directions. The both inline tubings O.D are bigger than tube O.D in the middle.
| Specification of 10mm O.D to 9mm O.D Tube Union Tee Reducer Push to Connect Fitting |
|
| Part Nymber: PEG 10-09 |
 |
| Push in Tube O.D1: 10mm |
|
| Push in Tube O.D2: 9mm | |
| Body Material: PBT Plastic | |
| Sealing, O-ring: NBR |
|
| Lock Claw: Stainless Steel |
|
| Fluid Admitted: Air, Vacuum, Water* |
|
| Working Pressure: 0∽1.0MPa | 0∽150psi | |
| Proof Pressure: 3.0Mpa | 435psi | |
| Negative Pressure: -100Kpa | -29.5 In Hg | |
| Working Temperature: 0∽60°C | 32∽140°F | |
| Applicable Tube: PU/PA/PE/PVC/PTFE... | |
| *Not intended for use in potable water systems, no freezing | |