4mm O.D to 4mm O.D tube union tee push to connect fitting is used for connecting three 4mm O.D plastic tubings in both 90 degree directions in tubing systems. The body of 4mm tubing union tee is PBT plastic.
| Specification of 4mm O.D to 4mm O.D Tube Union Tee Push to Connect Fitting |
|
| Part Nymber: PE 04 |
 |
| Push in Tube O.D: 4mm |
|
| Body Material: PBT Plastic | |
| Sealing, O-ring: NBR |
|
| Lock Claw: Stainless Steel |
|
| Fluid Admitted: Air, Vacuum, Water* |
|
| Working Pressure: 0∽1.0MPa | 0∽150psi | |
| Proof Pressure: 3.0Mpa | 435psi | |
| Negative Pressure: -100Kpa | -29.5 In Hg | |
| Working Temperature: 0∽60°C | 32∽140°F | |
| Applicable Tube: PU/PA/PE/PVC/PTFE... | |
| *Not intended for use in potable water systems, no freezing | |