Union tee reducer composite push to connect fittings use to branch line with size down in both side 90° direction in tubing system applications. Tubing outer diameter in the middle is smaller than inline. Union tee reducer push in tube fittings are constructed of three primary components: the body, the release collar, and the sealing ring.

The stainless steel lock claw design of union straight reducer push in fittings ensure superior clamping with various types of pneumatic plastic tubing such as polyethylene (PU) tubing, polyurethane (PE) tubing, nylon tubing (PA) and teflon (PTFE) tubing.

• Applicable Tubing O.D.: ø3mm, ø4mm, ø5mm, ø6mm, ø7mm, ø8mm, ø9mm, ø10mm, ø11mm, ø, 12mm, ø13mm, ø14mm, ø15mm, ø16mm, ø1/8", ø5/32", ø3/16", ø1/4", ø5/16", ø3/8," ø1/2", ø5/8"

Specification | Structure
Body: PBT Plastic
Sealing, O-ring: NBR
Lock Claw: Stainless Steel
Fluid Admitted: Air, Vacuum, Water*
Working Pressure: 0∽1.0MPa | 0∽150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∽60°C | 32∽140°F
Applicable Tube: PU/PA/PE/PVC/PTFE...
Shape of Release Sleeve: Round, Oval
*Not intended for use in potable water systems, no freezing

Union Tee Reducer Composite Push to Connect Fittings

Metric Tube, Inch Tube
PART #	TUBE O.D1	TUBE O.D2	IMAGE
PEG 06-04	Ø6mm	Ø4mm
PEG 08-04	Ø8mm	Ø4mm
PEG 08-06	Ø8mm	Ø6mm
PEG 10-06	Ø10mm	Ø6mm
PEG 10-08	Ø10mm	Ø8mm
PEG 12-06	Ø12mm	Ø6mm
PEG 12-08	Ø12mm	Ø8mm
PEG 12-10	Ø12mm	Ø10mm
PEG 14-10	Ø14mm	Ø10mm
PEG 14-12	Ø14mm	Ø12mm
PEG 16-12	Ø16mm	Ø12mm
PEG 16-14	Ø16mm	Ø14mm
PEG 5/32-1/8	Ø5/32"	Ø1/8"
PEG 3/16-1/8	Ø3/16"	Ø3/8"
PEG 3/16-5/32	Ø3/16"	Ø5/32"
PEG 1/4-1/8	Ø1/4"	Ø1/8"
PEG 1/4-5/32	Ø1/4"	Ø5/32"
PEG 1/4-3/16	Ø1/4"	Ø3/16"
PEG 5/16-5/32	Ø5/16"	Ø5/32"
PEG 5/16-1/4	Ø5/16"	Ø1/4"
PEG 3/8-1/4	Ø3/8"	Ø1/4"
PEG 3/8-5/16	Ø3/8"	Ø5/16"
PEG 1/2-5/16	Ø1/2"	Ø5/16"
PEG 1/2-3/8	Ø1/2"	Ø3/8"